Actron designs and manufactures: Aluminum & stainless steel rails, retainers, latches, hangers, pulls, handles, knobs, door bolting systems, cable retractors & extractors, waveguide couplings & miscellaneous hardware.
Deking manufacturers bonding jumpers, grounding straps for Mil/Aero applications. Machine house featuring Swiss type and Automatic Screw Machine, CNC Machines and Support Equipment. ISO 9001 and AS9100 approved.
Harwin designs & manufactures: EZ Board Hardware: SMT RFI Shield clips and cans in varying shapes and sizes. SMT Grounding/RFI contacts in varying shapes and sizes. SMT cable clips in varying sizes. SMT PC board sockets. SMT Jumper Links. SMT Coin Cell battery holders. SMT Test Points. Terminals and Spacers.
International Manufacturing Services, Inc. (IMS) designs and manufactures Resistors, Thermal Management Products and Jumper links.
Motor Magnetics Inc., designs and manufacturers AC/DC brush, brushless, induction, synchronous, gear, alternator, vaneaxial fans, blowers, permanent magnet generators and other specialty motors.
Anoison designs and manufactures Coaxial Connectors: BNC, N, TNC, 7/16, SMA, SMB, MCX, MMCX, 1.85 mm, 2.4 mm, 2.92 mm, HPQN, SMP, SMPM, QMA and more. Coaxial Adapters and Tee Adapters covering every major series. Coaxial Terminations: 1.85 mm, 2.4 mm, 2.92 mm, 4.3-10, 7/16 HPQN, N, QMA, SMA, SMP, SMPM, TNCA. Cable Assemblies for VNA High Performance, Low Loss Flexible, Formable, Semi-rigid.
Harwin provides high reliability connectors: Datamate: a 4 finger contact design, 2 mm pitch with signal contacts to 3 amps, power contacts to 40 amps, mixed signal, power and 50 Ohm 6 GHz coax with latching, jack screw and 101-Lok. Also available in a shielded metal backshell version. Gecko: a 4-finger contact design, 1.25 mm pitch, contacts to 2 amps featuring latching and a screw lok design. M300: a 4-finger contact design, 3 mm pitch, 5 and 10 amp contacts, jack screw locking. Industry standard and industry compatible pin headers and sockets featuring pitches of 2.54 mm, 2 mm, 1.27 mm, 1.25 mm and 1.0 mm. Commercial 5015 connectors. Hot Shoe connectors featuring a spring probe design and meets IP68 sealing. PC board sockets. RF Shielding.
Ulti-Mate Connector Inc. manufacturers Micro D connectors: metal & plastic housings, signal, power, coax contacts. Connector Saver. Micro connectors: metal & plastic housings, single and double row designs, power & coax combinations, latching plug available, circulars. Nano connectors: compatible to MIL-DTL-32139. Metal & plastic housings, latching plug, single and double row designs, circulars, hermaphroditic. Cable Assemblies, overmolded assemblies and custom connectors.
Filtronetics manufacturers microwave filters from 500MHz to 15 GHz with Cavity, Interdigital and Stripline configurations
International Manufacturing Services, Inc. (IMS) designs and manufactures Chip Resistors including: High Power AiN and Single-Sided Alumina; Full, Partial, Single-Sided Wrapped; High Value Wrap, Extended Power Wrap, Thick and Thin Film Nickel Barrier and more. Chip Attenuators: Thin Film Nickel Barrier, Temperature Variable, Thick Film including High Power AiN designs. Splitters: Wideband Resistive and Thin Film. Wideband Resistive Couplers. Power Dividers. Thermal Management Products.
Vanguard manufacturers standard Space and Military level: MIL-PRF-21038, MIL-PRF-15305, MIL-PRF-83446 inductors and transformers Custom products including power and common mode chokes, chip inductors, RF magnetics and inductors, high temp inductors, magnetics and transformers.
Filtronetics Manufactures a full line of Filters, Crystals, Oscillators & Coils. Filters: Los Pss, High Pass, Band Pass, Diplexer, Band Stop Filters MHz to GHz in LC/Microwave, Monolithic, SAW, Ceramic and Tunable designs. Crystals: KHz to MHz in Surface Mount and Thru Hold packages. Oscillators: Standard and Clock XO, VCXO, TCXO, VCTXO, OCXO in Surface Mount and Thru Hole packages.
International Manufacturing Services, Inc. (IMS) designs and manufactures: Chip Planar Filters.